Physical Quantities, SI Units and Unit Conversion
Open the lesson
The seven SI base units, the prefixes from pico to giga, and the conversions every chemistry student needs: litre to mL and cubic metre, density from g/mL to kg per cubic metre, Celsius to kelvin and Fahrenheit, the angstrom, atm to pascal, bar and mm Hg, the topper's factor-label trick, and two solved JEE problems with the classic traps.
Chapters
- 0:00Introduction
- 0:34The seven SI base units
- 1:11Prefixes: powers of ten
- 2:13Volume and density
- 3:25Temperature: Celsius, kelvin and Fahrenheit
- 4:24Length and pressure
- 4:59Topper's trick: the factor-label method
- 5:49Example 1: density from g/mL to kg per cubic metre
- 7:00Example 2: when Celsius equals Fahrenheit
- 8:18Quick revision: SI units, volume and factor-label method
Transcript
0:00Introduction
Hello everyone! Okay, one small puzzle before we start. Normal body temperature is thirty seven degrees Celsius, right? But a doctor using the Fahrenheit scale writes ninety eight point six, for the very same body. Same body, two different numbers! So, is there any temperature at which both thermometers show exactly the same number? Hold on to your guess; we will crack it by the end. And remember, in JEE, one wrong unit can spoil a perfect calculation. So, let's begin.
0:34The seven SI base units
So, first, the S I system. It has seven base units, and the symbol of each one is in brackets on screen. The first three you already know: length in metre, mass in kilogram, and time in second, okay? Next, electric current, in ampere, and thermodynamic temperature, in kelvin. Careful: the S I unit of temperature is the kelvin, not the degree Celsius, okay? And the last two: amount of substance, in mole, written m o l, and luminous intensity, in candela, written c d. That's it, seven. Clear?
1:11Prefixes: powers of ten
Alright, now prefixes. Instead of long strings of zeros, we put a small word before the unit. The small ones: pico is ten to the power minus twelve, nano is ten to the power minus nine, micro is ten to the power minus six, milli is ten to the power minus three, centi is ten to the power minus two, and deci is ten to the power minus one. So one millilitre is one thousandth of a litre, okay? And the big ones: kilo is ten to the power three, mega is ten to the power six, and giga is ten to the power nine. So kilo means one thousand, and mega means one million. Small prefixes below the unit, big ones above it. Easy, isn't it? Now a quick trap. Kilo means one thousand. So the real base unit of mass must be the gram, right? No, no, careful! The S I base unit of mass is the kilogram. One kilogram is ten to the power three grams, so this base unit already carries the prefix kilo. Got it?
2:13Volume and density
Now the everyday conversions. Volume first. One litre equals one cubic decimetre, which equals one thousand millilitres, which equals one thousand cubic centimetres. So one millilitre and one cubic centimetre are exactly the same volume, okay? And in the S I unit, the cubic metre: one litre is ten to the power minus three cubic metre. So one cubic metre is one thousand litres, okay? Now density, mass per volume. Since a millilitre is a cubic centimetre, one gram per cubic centimetre is the same as one gram per millilitre. On screen, centimetre to the power minus three just means per cubic centimetre, and millilitre to the power minus one means per millilitre, okay? Now think. Is one gram per millilitre the same as one kilogram per cubic metre? Not at all! It is one thousand kilogram per cubic metre. Here is why. Grams to kilograms divides the number by one thousand. But one cubic metre holds ten to the power six millilitres, so per millilitre to per cubic metre multiplies it by ten to the power six. Net effect: multiply by one thousand. That's it!
3:25Temperature: Celsius, kelvin and Fahrenheit
Next, temperature. Celsius to kelvin is easy: just add. Capital T in kelvin equals small t in degree Celsius, plus two hundred and seventy three point one five, okay? Now Celsius to Fahrenheit. We need nine by five and thirty two. So tell me, which comes first: multiply by nine by five, or add thirty two? Yes, multiply first! So, t in degree Fahrenheit equals nine by five times t in degree Celsius, plus thirty two. If you add thirty two first and then multiply, the answer comes out wrong, okay? Let's check with our hook. Thirty seven plus two seventy three point one five is three hundred and ten point one five kelvin. And nine by five times thirty seven is sixty six point six; plus thirty two, ninety eight point six. See? Same body! Just different scales.
4:24Length and pressure
Two more. For bond lengths we use the angstrom: the capital letter with a small ring on top. One angstrom is ten to the power minus ten metre, which is zero point one nanometre, or one hundred picometre, okay? And pressure. One atmosphere equals one lakh one thousand three hundred and twenty five pascal, which is one point zero one three bar, which is seven hundred and sixty millimetres of mercury, the m m H g on screen. Write these down; numericals use them all the time. With me?
4:59Topper's trick: the factor-label method
Now the topper's trick for every conversion: the factor label method. Look at this fraction: one thousand millilitres on top, one litre below. Top and bottom are the same volume, so the fraction is just equal to one. We call it a unit factor. Multiplying by one changes only the units, never the quantity. Now tell me: for litres to millilitres, should the litre sit on top of the factor, or at the bottom? At the bottom, exactly! Then the litre in your number cancels the litre below, and only millilitres are left. So multiply by as many unit factors as you need, and cancel units one by one. And the built in safety check: if the units do not cancel to the ones you want, the set-up is wrong. So stop and fix the factor before you calculate anything. Completely foolproof.
5:49Example 1: density from g/mL to kg per cubic metre
Right, example one. The density of concentrated sulphuric acid is one point eight four gram per millilitre. Express it in kilogram per cubic metre. Pause the video, and try it with unit factors. Done? Okay, let's check. Gram is on top, so the first factor has gram at the bottom: one kilogram over one thousand grams. Millilitre is at the bottom, so the next factor has millilitre on top: ten to the power six millilitres over one cubic metre. Why ten to the power six? One cubic metre is one thousand litres, and each litre is one thousand millilitres. Now cancel. Gram cancels gram, millilitre cancels millilitre, leaving kilogram per cubic metre, exactly what we wanted. One point eight four, divided by one thousand, times ten to the power six: one thousand eight hundred and forty kilogram per cubic metre. And the quick check, from our density line: one gram per millilitre is one thousand kilogram per cubic metre. So one point eight four into one thousand: one thousand eight hundred and forty. Matches, right?
7:00Example 2: when Celsius equals Fahrenheit
Now the harder one: our puzzle from the start. At what temperature do the Celsius and Fahrenheit scales show the same number? Pause and try. Hint: call that common number t. Done? Okay, let's check. If both scales show the same number, put t F equals t C equals t, in our Fahrenheit formula. So t equals nine by five t, plus thirty two, okay? Bring the t terms to one side. Now, t minus nine by five t is minus four by five t. And this arrow on screen just means 'which gives': minus four by five t equals thirty two, okay? Now, thirty two times five by four is forty. So the answer is forty degrees, right? No, no, careful! You dropped the minus sign. Classic JEE trap. So t equals thirty two times minus five by four, that is, minus forty. So minus forty degrees Celsius is exactly minus forty degrees Fahrenheit! At minus forty, both thermometers show the same number. Puzzle solved! And always check. Nine by five of minus forty is minus seventy two; plus thirty two, minus forty. Spot on, isn't it?
8:18Quick revision: SI units, volume and factor-label method
So, quick revision. Seven S I base units; mass in kilogram, temperature in kelvin. One litre is one thousand millilitres, or ten to the power minus three cubic metre, and one gram per millilitre is one thousand kilogram per cubic metre. And for every conversion, multiply by unit factors until the units cancel. Now go and try the practice problems on this page. You will find them easy, I promise. All the best!
More videos in Unit 1 · Some Basic Concepts in Chemistry
- Matter and its Classification
- Scientific Notation and Significant Figures
- Laws of Chemical Combination
- Gay-Lussac's Law, Avogadro's Law and Dalton's Atomic Theory
- Atomic Mass and Isotopes
- Molecular Mass and Formula Mass
- The Mole and the Avogadro Constant
- Counting Atoms, Ions, Electrons, Protons and Neutrons
- Gas Volumes in the Mole Map
- Percentage Composition
- Minimum Molar Mass
- Empirical and Molecular Formulae
- Formulae from Combustion Data
- Hydrates, Metal Compounds and Non-stoichiometric Oxides
- Carbon and Hydrogen: Liebig's Method
- Nitrogen: Dumas' Method
- Nitrogen: Kjeldahl's Method
- Halogens: Carius' Method
- Sulphur and Phosphorus
- Oxygen by Difference and Complete Analysis
- Reading a Balanced Equation
- The Limiting Reagent
- Yield and Purity
- Sequential and Parallel Reactions
- The Principle of Atom Conservation and Mixtures
- Moles of a Gas from P, V and T
- Vapour Density and Average Molar Mass
- Volume Relations in Reactions
- Dalton's Law of Partial Pressures
- Eudiometry
- Mass Percent, Volume Percent and ppm
- Mole Fraction
- Molarity and Molality
- Converting Between Concentration Terms
- Dilution and Mixing
- Ions in Solution and Reactions in Solution
- Equivalent Mass and the n-Factor
- Normality and the Law of Equivalence
- Acid–Base Titrations and Back Titration
- Double Titration
- Volume Strength of Hydrogen Peroxide
- Hardness of Water
- Overview
- Mixed Problems: Set 1 (Mole Concept, Composition and Formulae)
- Mixed Problems: Set 2 (Stoichiometry and Gases)
- Mixed Problems: Set 3 (Concentration, Equivalents and Titrations)
- Overview
- Part A: JEE Main Level
- Part C: Concept Checks